Assembly Instruction

ManualsBrandsWest Elm ManualsAccessoriesWest Elm Patchwork Dresser

Parts/Pièces/Herrajes

Mounting Plate 4x

Nylon Strap 2x

Small Screw 4x

Large Screw 4x

Anti tip kit 2x

Plate de montage - x4

Bretelle en nylon – x2

Vis petite x4

Vis grande x4

Kit anti chavirement – 2x

Placa de montaje 4x

Cinta de Nylon 2x

Tornillo Pequeño 4x Tornillo Largo 4x

Kit para evitar que voltee

Summary of content (5 pages)

PAGE 1
! & * # 3 5 .
PAGE 2
1. With help lay the dresser onto its back on a clean smooth surface such as carpet or cardboard. Align legs as shown. Insert bolt (A), lock washer (B), and flat washer (C). Tighten with supplied wrench (D). 1. Avec de l’aide, couchez la commode sur le dos sur une surface moelleuse telle que du tapis ou du carton. Alignez les pieds comme illustrés. Insérez un boulon (A), une rondelle d’arrêt (B) et une rondelle plate (C). Serrez à l’aide de la clé (D) fournie. 1.
PAGE 3
2. Screw in center support leg as shown. 2. Vissez le pied de support central comme illustré. 2. Atornille la pata soporte como se muestra. 3. With help carefully stand the dresser upright without leaning it on the legs as this could damage the dresser. Insert shelf supports (E) into 4 level holes for the each shelf. Align shelf and carefully lay onto supports. 3. Avec de l’aide, redressez la commode sans l’appuyer sur les pieds, car ceci pourrait endommager la com mode.
PAGE 4
. Adjust levlers as needed for uneven flooring. 4. Ajustez les patins réglables au besoin pour contrer un sol inégal. 4. Ajuste los niveladores como sea necesario para ajustar al piso. CARE INSTRUCTIONS Hardware may loosen overtime. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect finish, avoid the use of chemicals and household cleaners. les pieces de fixation peuvent se desserrer apres un certain temps.
PAGE 5
back side wall NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installa tion of the anti-tip kit included with this product. Attaching furniture to wall with anti-tip kits. 1. Determine where the piece is to be placed and mark location on the wall for the mounting bracket screw holes. They should be placed approximately 1” below the top on the back of the piece of furniture. 2.