Assembly Instruction

round wall mirror

assembly instructions

Page 1 of 25566245/5566286/5566294/5566278/5651757 - 02/04/08

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect ﬁ nish.

! Proper assembly of this item requires 2 people.

paper template x

eva pad 4x

Parts:

drywall toggle anchor 2x

screw 2x

phillips screwdriver

level

PAGE 1
round wall mirror assembly instructions phillips screwdriver level ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people.
PAGE 2
round wall mirror assembly instructions A 1. Place the template at the desired location on wall and ensure that the template is level. Using a pencil, mark the locations on the wall as shown. This is where the hardware will be inserted. 2. Using a Philip’s head screwdriver, insert the drywall toggle anchors (A) into the wall at the insertion points. Press and turn clockwise until anchors are flush with the wall. B D 3.