Assembly Instruction

page 1 of 37450059 - 11/05

: square metal sofa

assembly instructions

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect the ﬁnish.

allen key 1x

short bolt: 1/4" dia x 3/4" 16x

A B

long bolt: 1/4" dia x 1 1/2" 4x

PAGE 1
: square metal sofa assembly instructions ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect the ﬁnish.
PAGE 2
: square metal sofa assembly instructions 1. Aligning the legs with the seat and the back cross-bar, insert long bolt (A) through pre-drilled holes in seat into pre-drilled holes in leg as shown. Tighten using allen key (C).
PAGE 3
: square metal sofa assembly instructions 2. Carefully lean sofa forward on front legs as shown. Insert seat back in frame as shown. Insert short bolt (B) through pre-drilled holes in tab and into pre-drilled hole in seat frame bottom as shown. Tighten using allen key (C). C B CARE INSTRUCTION Hardware may loosen over time. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect ﬁnish, avoid the use of chemicals and household cleaners.