Assembly Instruction

teak bath console

assembly Instructions

7626740 11/08 Page 1 of 3

! Tools Required

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect nish.

! Professional Installation is suggested.

A. Side frame 2x

F. Maxix 4x

K. Pan head screw ¾” 8x

B. Apron 2x G. Maxix bolt 4x L. Countersunk head screw 2”

C. Stretcher 1x H. Bolt 4x M. Allen key #4 1x

D. Shelf 1x I. L- Bracket 4x

N. Allen key #6 1x

E. Table top 1x J. Washer 4x

PAGE 1
teak bath console assembly Instructions ! Tools Required ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Professional Installation is suggested. A. Side frame 2x F. Maxifix 4x K. Pan head screw ¾” 8x B. Apron 2x G. Maxifix bolt 4x L. Countersunk head screw 2” 2x C. Stretcher 1x H. Bolt 4x M. Allen key #4 1x D. Shelf 1x I. L- Bracket 4x N. Allen key #6 1x E. Table top 1x J.
PAGE 2
teak bath console assembly instructions 1. Insert the 4 maxifix bolts (G) into the holes located on the 2 side frames (A). 2. Position the 2 side frames (A) as shown. Insert the 2 aprons (B), stretcher(C), and shelf (D). Insert the bolts (H) into the hole of shelf bracing as shown and tighten fully using the enclosed allen key #4 (M).
PAGE 3
teak bath console assembly instructions 3. Insert the 4 maxifix (F) into the hole of the apron as shown. Tighten fully using the enclosed allen key #6 (N). Insert the 2 countersunk head screws (L) into the holes of stretcher. 4. Position the top table (E) as shown. Apply the 4 L- bracketS (I) and secure using screws (K) CARE INSTRUCTIONS Hardware may loosen over time. Periodically check that all connections are tight. Wipe with a soft, dry cloth.