Assembly Instruction

Single Hole Lavatory Faucet

assembly instructions

Page 1 of 37627375 - 10.22.08

! Do not throw away packaging materials until assembly is complete.

! Please read all instructions carefully and completely before installation.

! Remove all parts and hardware from box and lay out on a clear work surface for easy identification.

Hardware

NO. DESCRIPTION QTY

1 ELDNAH 1

2 SET SCREW 1

3 ALLEN WRENCH 1

4 CARTRIDGE COVER 1

5 CARTRIDGE NUT 1

6 CARTRIDGE 1

7 FAUCET BODY 1

8 AREATOR 1

2 ESOH 9

1 GNIR-O 01

11 RUBBER WASHER 1

1 REHSAW 21

13 LOCK NUT 1

14 PRESS STYLE DRAIN BODY 1

15 DRAIN TUBE 1

! Professional installation required.

PAGE 1
Single Hole Lavatory Faucet assembly instructions ! Professional installation required. ! Do not throw away packaging materials until assembly is complete. ! Please read all instructions carefully and completely before installation. ! Remove all parts and hardware from box and lay out on a clear work surface for easy identification. Hardware NO.
PAGE 2
Single Hole Lavatory Faucet assembly instructions 1. Be sure water supply lines are turned to the off position. If applicable, remove existing faucet. 2. Clean surface of lavatory sink before installing new faucet. 3. Make sure drain in closed or blocked so that small parts do not fall into drain. 4. Install new faucet body assembly into the hole of the sink. Tighten mounting nut from underneath sink. Connect water supply line to faucet. 5. Remove the aerator from faucet before using for the first time.
PAGE 3
Single Hole Lavatory Faucet assembly instructions Constructed with long lasting ceramic disc cartridge and solid brass waterway for years of durability. -Flow Rate: 2.0 GPM/7.6 LPM Spout: 4 1/4” (10.8 cm) -Includes press style drain -Drilled hole size needed for assembly: 33mm-38mm, Max Deck Thickness: 1 1/2” (3.8CM), Drain Hole size: 1 1/4” (OD) -This model meets or exceeds the following codes/standards: ASME 112.18.1 / CSA B 125.