Assembly Instruction

teak bath tower short

assembly instructions

Page 1 of 3 5568845 - 03.05.08

! Tools supplied:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect ﬁ nish.

! Proper assembly of this item requires 2 people.

bolt : 6mm x 35mm 4x

bolt : 6mm x 50mm 8x

top 1x

leg 4x

shelf 2x

Hardware

Parts

PAGE 1
teak bath tower short assembly instructions ! Tools supplied: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people. Hardware A B bolt : 6mm x 35mm 4x bolt : 6mm x 50mm 8x Parts D C top 1x leg 4x E shelf 2x 5568845 - 03.05.
PAGE 2
teak bath tower short assembly instructions 1. Position the top (C) as shown, insert the 2 legs (D) into the opening located at each corner of the top (C). Once the leg is fully inserted, apply bolt (A) into the center hole of the top bracing as shown. Tighten fully using the enclosed allen key. Allen key A C D 2.
PAGE 3
teak bath tower short assembly instructions 3. Insert the remaining legs (D) into the opening located at each corner of the top (C). Once the leg is fully inserted, apply bolt (A) into the center hole of the top bracing as shown. Tighten fully using the enclosed allen key. Align the holes from the leg with the corresponding holes on the center of the shelf bracing (located on each corner). Apply bolt (B) into the center hole of the shelf bracing as shown. Tighten fully using the enclosed allen key.