Assembly Instruction

terra platform headboard

assembly instructions

Page 1 of 31576172/1576164/1576156/1576081/1576073 9-23-09

! Tools supplied:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish.

! Proper assembly of this item requires 2 people.

m6 x 20mm Bolts 21x

small “L” shaped bracket 4x

Hardware

large “L” shaped bracket 3x

PAGE 1
terra platform headboard assembly instructions ! Tools supplied: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people.
PAGE 2
terra platform headboard assembly instructions 1. Attach small “L” brackets (B) to bottom of headboard and secure by bolts (A). Tighten with supplied hex key. B A 2. Attach neadboard to bedframe (sold seperately). Align the short “L” shaped brackets to the pre-drilled holes located on the inner side of the low bedframe and secure with bolts (A). Tighten with supplied hex key.
PAGE 3
terra platform headboard assembly instructions 3. On the rear side of the bedframe and headboard attach 3 large “L” brackets (C). Insert bolts (A) and tighten with supplied hex key. Each bracket requires 3 bolts. CARE INSTRUCTIONS Hardware may loosen overtime. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect finish, avoid the use of chemicals and household cleaners. Upholstery: Spot clean only.