Assembly Instruction

terra cotta table lamp
lampe en terracotta
terracota lampara para mesa
assembly instructions
instrucciones de montaje
Instrucciones de Ensamblaje
Page 1 of 309.27.10
IMPORTANT SAFETY INSTRUCTIONS:
•This portable luminaire has a polarized plug (one bale is wider than the other) as a feature to reduce the risk
of electric shock. This plug will  t in a polarized outlet only one way. If the plug does not  t fully in the
outlet, reverse the plug. If it still does not  t, Contact a quali ed electrician. Never use with an extension
cord unless plug can be fully inserted. Do not alter the plug.
•These instructions are provided for your safety. It is important that they are read carefully and completely
before assembly of this lighting  xture.
• This  xture has been rated for up to (1) 60-WATT MAXIMUM TYPE A bulb OR 13 WATT compact  uorescent
bulb (included in box for lamps). To avoid the risk of  re, do not exceed the recommended wattage.
• Note : For your safety, if using shades, use only those with a minimum opening diameter and minimum
lamp-to-shade spacing meeting the measurements speci ed in the Alternate Shade include with these
instructions.
Warning:
•To reduce the risk of  re, electrical shock, or personal injury, always turn o light  xture and unplug, allow
it to cool prior to replacing light bulb.
•Do not touch bulb when  xture is turned on. Do not look directly at lit bulb.
•Keep  ammable materials away from lit bulb.
Pre-assembly:
•For your safety and convenience, assembly by two people is recommended.
•Remove all parts and hardware from box along with any plastic protective packaging.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
Parts Enclosed:
•(1) Lamp base (G) with pre-assembled:
o(1) Two-pronged saddle (F)
o(1) Socket (E)
•(1) Harp (C) with:
o(2) Harp caps (D)
o(1) Harp threads (B)
•(1) Finial (A)
•(1) 13Watt CFL Bulb(H)
To Assemble:
1.Gently squeeze both sides of the harp (C) and insert the ends into the saddle (F).
Lower the two harp caps (D) until they cover the two-pronged saddle on the lamp
base (G).
2.Remove  nial (A) from the harp (C).
3.Place lamp shade over the assembled harp and align the harp nipple (B) with the
opening at the top of the shade so that he nipple protrudes through the opening.
4.Attach  nial (A) and to secure the shade.
5.Insert bulb (not included) into threaded socket (E).
6.Plug into proper electrical outlet and test  xture.
7.Assembly is complete.
Care Instructions:
•Wipe with soft dry cloth only
•Always avoid the use of harsh chemicals or abrasives as they may damage the  nish