Assembly Instruction

mounting instructions

Triangle Bracket

NOTE:

• Stud mounting is recommended. Use proper hardware

for your wall type (such as anchors for drywall). When

in doubt, consult your local hardware store. For your

safety, installation by two people is recommended.

• Wipe with a soft, dry cloth. To protect the nish, avoid

the use of all chemicals and household cleaners.

5586136 - 04.11.08

page 1 of 1

drywall anchor 6x

screw 6x

• For drywall mounting, use anchors with screws.

For stud mounting, use screws only.

1. Mark the desired location of the shelf on your wall. Use a carpenter’s level to insure the shelf will be level. Hold the

brackets at desired locations and mark through the holes with a pencil onto the wall. Be sure that one screw for each

bracket will to go into a stud. The other screw for each bracket will be used with the drywall anchor.

2. For drywall mounting: using a Philip's head screwdriver, insert the drywall anchors (A) into the wall at the insertion

points. Press and turn clockwise until anchors are flush with the wall. Insert one screw (B) per bracket through the

bracket holes into the anchors.

3. Insert one screw (B) per bracket through the bracket holes directly into studs.

4. Place wood shelf on brackets.

NOTE: Load maximum for shelving!

36 inch shelf max load is 15lbs

48 inch shelf max load is 20lbs

60 inch shelf max load if 25lbs