Assembly Instruction

page 1 of 3

assembly instructions

6759724 - 03/05

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect the finish.

* Umbrella sold separately.

: umbrella base round

PAGE 1
: umbrella base round assembly instructions * Umbrella sold separately. ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect the finish.
PAGE 2
: umbrella base round assembly instructions 1. Place metal washer around base of tube. Insert both tube and washer into the hole of base. 2. Turn clockwise until fully tightened.
PAGE 3
: umbrella base round assembly instructions 3. Insert umbrella (sold separately) into opening at top of tube. Three plastic adapters are inset into the top of the stand tube. Use as is for umbrellas with thin poles, or take out adapters as needed for different umbrella pole sizes. 1x 4. Secure umbrella by turning the tightening key until umbrella pole stands securely upright. CARE INSTRUCTIONS. Wipe with a dry or slightly damp cloth and dry thoroughly.