Assembly Instruction

ManualsBrandsWest Elm ManualsAccessoriesWest Elm Wood Block Platform Headboard

wood block platform headboard

assembly instructions

Page 1 of 6

8697435/8697484/8697500/8697542/8697567/8279895/8279838/8279879/8279853/8279812/9692781/

9692807/9692823/9692849/9692872 - 08/07

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect nish.

! Proper assembly of this item requires 2 people.

screw 35x

Summary of content (6 pages)

PAGE 1
wood block platform headboard assembly instructions ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people.
PAGE 2
wood block platform headboard assembly instructions headboard corner bracket 2x headboard bracket 3x back bracket 3x 8697435/8697484/8697500/8697542/8697567/8279895/8279838/8279879/8279853/8279812/9692781/ 9692807/9692823/9692849/9692872 - 08/07 Page of 6
PAGE 3
wood block platform headboard assembly instructions 1. Attach 2 corner brackets to bed frame as shown. Insert 8 screws (A) and tighten with phillips screwdriver. Pre-drill screw holes using an electric drill and 1/8” drill bit. Some beds already have pre-drilled holes.
PAGE 4
wood block platform headboard assembly instructions 2. Attach 3 headboard brackets to bottom of headboard as shown. Insert 12 screws (A) into pre-drilled holes and tighten with phillips screwdriver.
PAGE 5
wood block platform headboard assembly instructions 3. Attach headboard to platform bed as shown. Insert 9 screws (A) through headboard brackets into bed frame and tighten with phillips screwdriver. Pre-drill screw holes using an electric drill and 1/8” drill bit. Some beds already have pre-drilled holes.
PAGE 6
wood block platform headboard assembly instructions 4. Attach 3 back brackets to headboard as shown. Insert 6 screws (A) into pre-drilled holes and tighten with phillips screwdriver. A CARE INSTRUCTIONS Hardware may loosen over time. Periodically check that all connections are tight. Regularly vacuum or brush with nonmetallic stiff-bristle brush to remove dust and grime. Protect from direct sunlight to prevent fading.