Installation & Assembly

West Ninth Vintage Downrod Light Fixture Installation Instructions
West Ninth Vintage Downrod Light Fixture Installation Instructions
INSTALLATION INSTRUCTIONS
WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS
SHUT OFF; EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED
OFF. TURNING THE POWER OFF USING THE LIGHT SWITCH IS NOT SUFFICIENT TO
PREVENT ELECTRICAL SHOCK.
NOTE: The important safeguards and installation instructions appearing in this guide are not
meant to cover all possible conditions or situations that may occur. It must be understood that
common sense, caution, and care, are factors which cannot be built into any product. These
factors must be supplied by the person(s) installing this unit.
READ & SAVE THESE INSTRUCTIONS
CAUTION: If you feel you do not have enough electrical wiring experience, either refer to a do-it–
yourself wiring handbook or have your lighting fixture installed by a qualified, licensed electrician.
UNPACK THE PACKAGE
Check the contents to be sure everything is included
Tools Needed: Personal Protection equipment, Screwdriver, Step ladder, Wire cutters, wiring supplies as
required by electrical code.
INSTALLATION & OPERATION INSTRUCTIONS GENERAL
Before starting the installation, disconnect the power by turning off the circuit breaker or by removing
the appropriate fuse at the fuse box. Turning the power off using the light switch is not enough to
prevent electrical shock.
All electrical connections must be in accordance with local and National Electrical Code (NEC) standards.
If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified
electrician.
Remove the fixture and the mounting packages from the box and make sure that no parts are missing by
referencing the illustrations in the installation instructions.
Be sure to read these installation instructions and review the diagrams thoroughly before installation.
For any questions regarding your light fixture contact us via email
[e-mail]