User's Manual

4. Supplementary Functions
4.1 Call Functions
4.1.1 Speed Dial
This terminal will store up to 99 phone numbers using 2 digit addresses (01-99). The stored
number in the Phonebook allows a call to be placed by pressing the two digit address. This
terminal has the ability to search and edit numbers stored in the Phonebook, and the methods for
storing, searching and editing a stored phone number are explained in section 4.2.
4.1.1.1 Speed Dial Function On / Off
You can set the Speed Dial function by entering the following functions.
1) Speed Dial On
Press;
#0*100 à 1 à 1 à 1 à * : Speed Dial function on
2) Speed Dial Off
Press;
#0*100 à 1 à 1 à 2 à * : Speed Dial function off
4.1.1.2 Making a Call Using the Speed Dialing Function
1) Make sure the Speed Dial Function is “ on” and find the mem ory station number in the
Phonebook.
2) If the saved address is a single digit, between 1 and 9, pick up the handset and press the
number and hold it down, or press the number briefly and press the “*” button, then the call will be
made.
3) If the saved address is two digits, pick up the handset and press the first digit and then press the
second digit and hold it down or press both digit briefly and press the “*” button, then a call is made.
[Notice] If you attempt a Speed Dialing while the Speed Dial Function is OFF, an error tone will
sound to indicate wrong operation.