User's Manual

WS-2100/4100 Operating Manual

4.5.3 Default Data Rate setting

This terminal supports the standard data rates listed below.

- IS-99 Rate Set 1

- IS-99 Rate Set 2

- IS-707.4 Rate Set 1

- IS-707.4 Rate Set 2

The following is the Default Rate setting for Data Signal access.

1) Setting IS-99 Rate Set 1 (9.6K)

① Enter #0*100à8àMaintenance Codeà3 in order.

② Press <1> button.

③ Press <*> button to save the setting.

#0*100à8àMaintenance Codeà3à1 à *

2) Setting IS-99 Rate Set 2 (14.4K)

① Enter #0*100à8àMaintenance Codeà3 in order

② Press <2> button

③ Press <*> button to save the setting

#0*100à8àMaintenance Codeà3à2 à *

3) Setting IS-707.4 Rate Set 1 (9.6K)

① Enter #0*100à8àMaintenance Codeà3 in order

② Press <3> button

③ Press <*> button to save the setting

#0*100à8àMaintenance Codeà3à3 à *

4) Setting IS-707.4 Rate Set 2 (14.4K)

① Enter #0*100à8àMaintenance Codeà3 in order

② Press <4> button

③ Press <*> to save the setting

#0*100à8àMaintenance Codeà3à4 à *

4.5.4 Ringer Frequency & Cadence Control

You can set the Ringer Frequency and On/Off Time (Cadence) in this terminal.