User's Manual

WS-2100/4100 Operating Manual

4.5.8 Auto Dial Send Time Control

Auto Dial Send is a function that makes a call to the dialed number after specified time lapses.

Terminal starts making a call, specified seconds after user finishes dialing the number.

Auto dial send time is adjustable from 4 seconds to 8 seconds and default setting is 6 sec.

2 setting methods are provided below.

◆ Auto Dial Send Time Setting

1) Using A Menu Code

① Enter #0*100 à 8 à Maintenance Codeà8

② Press any number among 4 , 5 , 6 , 7 , 8 on the key pad. For example, if you press <5> key, the

send waiting time becomes 5 sec onds.

③ Press <*> button in succession.

#0*100 à 8 à Maintenance Codeà 8 à 4～8 à *

4.5.9 PCO Frequency Setting

This terminal supports the Metering Pulse and the Polarity Reverse for the PC O Interface.

If the Metering Pulse is required for the PCO Interface, 2 kinds of frequencies can be

supported.

1) S etting Metering Pulse F requency to 12KHz

#0*100à8àMaintenance C odeà9à1à *

2) S etting Metering Pulse F requency to 16KHz

#0*100à8àMaintenance C odeà9à2à *

4.5.10 PRL select (Only applicable to WS - 2100)

This is a cruc ial function to decide the source of Channel information when the phone

searches for CDMA Cellular Channel.

Prefer Roaming List which is being used in CDMA PCS C hannel S earching can be

partially used in Cellular Channel Searching too.

If “ Enable ” is selected, channel information necessary for Cellular Channel Searching

is brought from Prefer Roaming List.

If “ Disable ” is selected, the original Channel S earching Method is proceeded. In other

words, it searches for C DMA Primary A/B, S econdary A/B channel.

[Note] This phone supports Prefer Roaming List stated in accordance with IS-683A.