User's Manual

WS2000/WS4000 Operating Manual
56
[MENU]
→
1
→
2
? Press ;
[MENU] ? 1 ? 1
There are 6 Bell-Type and 4 Melody-
Type rings available.
? The screen (Figure 5.2.1) is
displayed with the current ring setting
To store the ring type, use [?] or [?]
button to select the desired ring type
and then press [STORE] button.
5.2.2 DTMF Tone Length
When dial buttons are pressed during a calling state for the additional service
of system or for the connection with ARS system, DTMF Tone length which is
transmitted over the air can be selected into 2 types of mode;
- <Short Mode> that sends DTMF Tone for 0.2 seconds after pressing the dial
button.
- <Long Mode> that sends DTMF Tone continuously as long as the dial
button is pressed.
? Press;
[MENU] ? 1 ? 2
? The screen (Figure 5.2.2) is
displayed.
? At this time, select the DTMF Mode
desired using the [?] or [?] button,
followed by the [STORE] button to
save.
5.2.3 Keypad Volume
[MENU]
→
1
→
1
(
Figure
5.2.1) Ring Select
?
[STORE]
<Ring1> playing
(
Figure
5.2.2) DTMF Tone Length
? Short
DTMF Tone Length