User's Manual

WireSpeed ADSL Modem
User Guide
030-300166A 51 Product Specifications
PRODUCT SPECIFICATIONS
R
OUTING
• Dynamic Host Control Protocol (DHCP) - Automatic or Manual Local Address Assignment
• Network Address Translation (NAT )
• DNS Proxy Implementation
T
RANSPORT AND
A
PPLICATION
P
ROTOCOL
S
UPPORT
• TCP, UDP, ICMP, SMTP, NNTP, FTP, HTTP, HTTPS, SSL, DNS, PPTP
• Support for PPTP VPN tunnel through NAT router
• Bridge PPPoE from PC simultaneously with NAT router PPPoE session.
T
RAFFIC
M
ANAGEMENT
• PPP over AAL5
• Link Control Protocol
• CHAP and PAP Authentication
• IP Control Protocol (IPCP): RFC – 1332
• IPCP Configuration Options
– IP Address Configuration
– Preliminary and Secondary DNS
• Address Proxy (Patent Pending)
• PPP Echo Request-Reply
• Internet Control Message Protocol
• Router Advertisement /Solicitation
• ICMP Echo Request/Reply (Ping)
• ARP
• Path MTU Discovery
M
INIMUM
S
YSTEM
R
EQUIREMENTS
• Westell ADSL Ethernet modem
• Microsoft® Windows 98, Windows ME, Windows 2000, or Windows NT 4.0
• Microsoft® Internet Explorer™ 4.x or higher, or Netscape Navigator ™ 4.x or higher
• 5 MB of free Hard Drive space
• 16 MB RAM
• Ethernet 10Base-T network interface card
• TCP/IP Protocol stack installed
• Multi-Port Ethernet 10BaseT Hub (optional)
• Crossover Ethernet cable for modem to Ethernet Hub
• VPI/VCI Values (provided by your service provider)
• PPPoA/PPPoE support (provided by your service provider)
C
ONFIGURATION
• User configurable parameters include:
- Account name and password
- DHCP Function (Enable/Disable)
- DHCP Base Address
- Primary and Secondary DNS server address
- Password (secret) - used to respond to CHAP/PAP challenges
- True “Always On” functionality. (User can configure modem to remember password.)