CONFIGURE ROUTERS to PORT FORWARD Instruction Manual English Version1.0 www.lorexcctv.com Copyright © 2006 Lorex Technology Inc.
Table of Contents INTRODUCTION ........................................................................................................................................................................ 4 THE ROUTER CONFIGURATION.......................................................................................................................................... 4 PORT FOWARDING AND DMZ OPTIONS...................................................................................................................
SPEEDSTREAM 5100,5200, 5400, 5500 .................................................................................................................................... 33 ZYXEL ....................................................................................................................................................................................... 34 ZYWALL1, ZYWALL2WE, ZYWALL2, ZAWALL10, ZYWALL100...............................................................................................
INTRODUCTION The purpose of this manual is to help distributors, installers and customers in general to configure their routers for use with a network device such a digital video recorder, video server etc. Our goal is to provide enough information to configure the router and successfully connect to the cameras over the internet. This manual shows most common router models on the market. If your router it is not listed in the manual identify the other routers listed and see if there is a similar one.
PORT FOWARDING AND DMZ OPTIONS Before you start working with your router is important to : 1. Assign a static IP address and select the ports to your network device( * ) , ( See Appendix B for more information ). 2. Have ready your router (gateway) IP address to access the router menus ( See appendix A for more information). 3. Have the port list ready according with your product needs to create the forwarding rules. ( See page 7 with all products listed).
forwarding rule and that rule contains information related to port 2000. That means the internal IP address (gateway) on your LAN will communicate only with the network device on the LAN configured to receive the data for port 2000. If you have one network device working with port 2000, only this device will be able to use port 2000. That means only a port number can be used for a program or network device.
LIST OF PORTS FOR LOREX NETWORK DEVICES FAMILY IPSC MODELS IPSC2230 Day Night Camera PORTS TCP port 80 UDP Port 9001 COMMENTS Default Port : 80 IPSC IPSC2206 TCP port 80 UDP Port 9001 Default Port : 80 Any Default port is 80. Only one port is needed. Suggested alternated port : 2000 Default ports : 5600 and 5700 PAN/TILT DIGITAL ZOOM NETWORK CAMERA Video server L4202 DVM Software 5600-5700 TCP ports: Video :The default value is port 5700. Users can modify this value.
NETWORKABLE 2 PAGE - 8 CHANNEL 21" COLOR QUAD WITH 4 NIGHT VISION CAMERAS NETWORKABLE 2 PAGE - 8 CHANNEL 14" COLOR QUAD WITH 4 COLOR NIGHT VISION CAMERAS L21Q784 80 http1 : 80 TCP http2 :blank ( any port ) L14Q684C 80 http1 : 80 TCP http2 :blank ( any port ) IP Camera IPSC1240 80 http1 : 80 TCP http2 :blank ( any port ) • Note : Port 80 is the http port for the Internet browser and it is usually blocked by the Internet Service Provider.
ROUTERS SECTION This section shows the procedure to create port forwarding rules. The information is presented by manufacturer and model.
LINKSYS BEFDSR41W, BEFN2PS4, BEFSRU31, BEFSRU31, BEFSR41 V1& V2, BEFSR V2FW 1.40.2, BEFSR41 V3 V4 & V5, BEFSR81, BEFSX41, BEFSX41-CA, BEFVP41 V1&V2, BEFVP41-CA, BEFW11S4, BEFW11S4 v2,v3, & 3.2, BEFW11S4 V4, BEFW11S4-CA v2 & v4, WRT51AB, WRT55AG Log in to the Router's Web-based Utility. (This is usually done by opening your web browser, entering 192.168.1.1 in the Address field ( or your “default gateway” IP address from your PC ), and pressing the Enter key. You should see the following screen.
DISABLE BLOCK WAN REQUEST FEATURE. DMZ OPTION Press the Advance tab and select the Filters tab. If you don’t want to enable the port range forward feature you can use the DMZ option to open all the port at once. Click and disable the Block Wan request feature. Click on the Advance tab on the top When finish click on Apply to save the changes. Click on the DMZ Host option Enter your network device (*) IP address and press apply.
LINKSYS. wireless BEFSR41-CA, BEFSX41 V1.50, BEFW11S4 v1.50.10, BEFW11S4 v1.50.14, RT31P2, WAG54G, WRK54G, WRT54G, WRT54G v1.1 v2 & CA, WRT54G v2.04, WRV54G, WRV54GCA Log in to the Router's Web-based Utility. (This is usually done by opening your web browser, entering 192.168.1.1 in the Address field ( or your “default gateway” IP address from your PC ), and pressing the Enter key.) You should see the following screen. On the left hand side put the name ** of the application.
DISABLE BLOCK WAN REQUEST FEATURE. DMZ OPTION If you don’t want to enable the port range forward feature you can use the DMZ option to open all the port at once. Press the SECURITY tab Click and disable the Block Wan request feature. Click When finish click on Save Settings to save the changes. Click on the DMZ option on the APPLICATIONS GAMMING Tab on the top.
DLINK Models DI-514, DI-524, DI-604, DI-614+, DI-624, DI-704P (revB), DI-704P (revC), DI-704UP, DI-707P, DI-714P+, DI-754, DI-764, DI-774, DI-784, DI-804HV, DI-808HV, and DI-824VUP: Open your web browser and enter the IP address of your router (192.168.0.1). Enter username (admin) and your password (leave blank). Enter the private network device (*) IP address into the Private IP box. Select the protocol type from the Protocol type drop down box.
SMC 2804WBRP-G, 2804WBR V1, V2, 7804WBRB DMZ Option Only Open a web browser. In the address bar type the IP address of your router. This IP address is 192.168.1.2 by default. Press enter Step 4: Click DMZ in the left hand menu. This will open up the screen below. Step 2: You should now see a login screen and it should be prompting you for a password. We want to log in as administrator, so enter your administrator password here. By default the administrator password is smcadmin.
Actiontec GT701-WG, GT704WR, R1020S, R1020S(U), R1520SU, R1524SU-1 Enter the IP address of your router in the address bar of your browser.. By default the IP address should be set to 192.168.0.1. Click on Port Forward on the left hand side. You should see the following menu. Click setup/configuration. You should see the following menu. Enter the following information : IP Port Range. Enter a port range. Example : For port 1080, start with port 1080, and end with port 1080.
DMZ OPTION. Click on DMZ Hosting option If you don’t want to use the port forward feature you can use the DMZ option to open all the ports at once Click setup/configuration. You should see the following menu. Enter the Network device (*) IP address, Then you click in the On radial button. Now click on Save and Restart on the left hand side. The following menu should appear. Click ADVANCE at the side of the menu. You will see the following menu To finish click Save and Restart.
NETOPIA CAYMAN 3300 Enter the IP address of your router in the address bar of your browser.. By default the IP address should be set to 192.168.1.254. • Click on CONFIGURE link on the top. • Click on the ADVANCE link Enter your user name and password. By default the username is admin, and the password is blank. Click the OK button to log in to your router. Click the Expert Mode link on the left hand side of your screen. On the ADVANCE Network menu click on the PINHOLES Option.
If you finished click on the Alert button. The Alert button is a Yellow triangle at the left top area of your menu Click on SAVE and Restart -Pinhole Name: your network device name ( ex DVR, video server , or PC) -Protocol type: TCP or UDP -External port start : Enter you start port -External port end : you end port Example using port 1080. External start port 1080 External end port : 1080 - Internal IP address: Enter your Network device (*) IP address.
WESTELL DSL MODEM/ROUTER B90-2200- 30-05 ( Bellsouth ) Open a web browser like internet explorer or Netscape Click the Expert Mode button on the left hand side of your screen. Then under Home click the Service Configuration button on the left hand side of your screen. Enter the IP address of your router in the address bar of your browser. By default the IP address should be set to 192.168.1.1. You should see a box prompting you for your username and password. Enter your username and password now.
Enter a name for the program or device you are forwarding ports for in the Service Name box. Ex : DVR Enter the ports to forward into the Global Port Range boxes. Example: for port 2000-2000 The smallest port number should go into the box on the left, while the largest port number should go into the box on the right. Click the Define Customer Service button to move to the next page Main port the program uses into the Base Port box. This is your lower port from your list.
Once you finished adding all the ports go back to the service configuration screen Use the Service Name drop down box to find and select the first configuration you just created for your network device name ( Ex DVR) . Then click the Enable button to enable it.
2200 ( Verizon ) Versalink 327W Open a web browser like internet explorer or Netscape Click on Configuration on the top Menu and Select Service configuration Enter the IP address of your router in the address bar of your browser. By default the IP address should be set to 192.168.1.1 Click the Define Customer Service button to move to the next page. You should see a box prompting you for your username and password. Enter your username and password now.
Enter a name for the program or device you are forwarding ports for in the Service Name box. Ex : DVR , Video server or PC. If you need to add additional ports or you need to specify both protocol types, click the Add button. Then repeat the above steps, and specify the other protocol or add another port. Enter the ports to forward into the Global Port Range boxes.
BELKIN F5D5231-1 Open a web browser like internet explorer or Netscape In the one titled firewall click Virtual Servers. This will bring you to the following menu. Enter the IP address of your router in the address bar of your browser. By default the IP address should be set to 192.168.2.1. We are going to be working in the table portion of this menu to forward ports. All the settings to forward a port or series of ports will go on one line.
- Enter your network device (*) IP address you wish to forward in the Private IP Address box. - DMZ Option On the Setup screen select DMZ at the left area of your menu Put a check in the Enable checkbox.. Click on Apply changes to finish (*) See page 5 for more information ------------------------ You will see the following menu Enter your Network Device (*) IP address and click on enable.
NETGEAR RP614v1 & v2, WGR614, WGT624v1 & 2, Open a web browser like internet explorer or Netscape On the menu bar to the left under Advanced click Port Forwarding You should now be at the Port Forwarding menu as shown below. Enter the IP address of your router in the address bar of your browser. By default the IP address should be set to 192.168.0.1. To create a new port forward service click on Add Custom Service button. You should see a box prompting you for your username and password.
DG824M V1.3 DMZ Option Open a web browser like internet explorer or Netscape On the menu bar to the left under WAN Setup Options You should see the WAN setup menu Enter the IP address of your router in the address bar of your browser. By default the IP address should be set to 192.168.0.1. You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is blank.
2 WIRE 1000HW, 1000S, 1000sw, 1800HG Open a web browser like internet explorer or Netscape Enter the IP address of your router in the address bar of your browser. By default the IP Address should be set to gateway.2wire.net The basic settings window will be visible Click the Add a new user-defined application link in the Applications section. Click on the FIREWALL button on the top Click FIREWALL SETTINGS in the firewall menu on the top of the screen Continue on next page……..
Enter the following information: Select a computer option:. device ( your network device(*) IP address) or computer your want to forward. -Application name. Enter the name of the program ( Ex. Your DVR, video server description ). On the Applications list scroll down and find the Application you just created and highlight it. -Protocol: TCP or UDP. -Port Range .
ZOOM X4 5551 Enter the IP address of your router in the address bar of your browser. By default the IP address should be set to 10.0.0.3 You should prompt for your password. Enter your password now. By default the password is blank. Click the Ok button to log in to your router Click the Advanced Setup button at the top of your screen. You should now see the following screen. Click the Advanced Setup button at the top of your screen. You should now see the following screen Continue on Next page…….
In the middle of this page you will see a NAT Options drop down box. Click the down arrow and select NAT Rule Entry Enter the following Settings 1. Rule Flavor drop down box. Select RDR from the list. 2. Enter a number in the Rule ID box. This number needs to be unique, so some number that was not listed on the services page.( any number not listed) 3. IF Name box. Select ALL 4. Protocol drop down box : Select the protocol type of the ports you are forwarding.(if you don’t know select ALL) 5.
EFFICIENT (SIEMENS) Speedstream 5100,5200, 5400, 5500 Enter the IP address of your router in the address bar of your browser. By default the IP address should be set to 192.168.254.254 Enter your username and password now. By default both the username and password are blank. Click the Ok button to log in to your router. Select Protocol drop down box. Then enter the port range in the TCP/UDP Ports box.
ZyXEL Zywall1, Zywall2WE, Zywall2, Zawall10, Zywall100 Enter the IP address of your router in the address bar of your browser. By default the IP address should be set to 192.168.1.
UNICOM wireless DMZ Option only Click on Internet on the Advanced menu at left side of the screen. Enter the IP address of your router in the address bar of your browser. Enter your User name and password to access the main menu (if needed) To enable the DMZ option, click enable on the first line. Select a PC. Click the drop down menu at the right and locate your network device (*) IP address.
GIGAFAST EE-400-R DMZ Option only Enter the IP address of your router in the address bar of your browser. The default IP address is 192.168.8.1 Enter your User name and password to access the main menu. By default the user name is blank and the password is admin. By default the DMZ page is disabled. Click the Enable radio button. Enter your Network device (*) IP address on the DMZ menu Then click the Save and Restart button.
Appendix A HOW TO ACCESS THE ROUTER CONFIGURATION SCREEN . The Router configuration is the most important step in the process to view the cameras on the Internet. Most of the routers are similar on the access, graphics interface and configuration. The first step to access the router configuration screen it is to know the router IP address or “Gateway”. Usually the Web Browser is commonly used to access the router configuration.
Appendix B SELECTING AND ASSIGNING AN IP ADDRESS FOR YOUR NETWORK DEVICE. Selecting an IP address for your network device ( DVR, Video server , PC ) is important. With the IP address you will be able to communicate on the Network properly. To obtain an IP address for your Network device try the following options. 1. FROM THE IT ADMINISTRATOR. 1. FROM THE IT ADMINISTRATOR. Medium to large networks are administrated usually by an IT Administrator.
( * ) See page 5 for more details… Let’s try to use another IP address adding another number to the last octet ( lets add 4 numbers, 73 + 4 = 77 ) and try again. Example 192.168.1.77 Type : ping 192.168.1.77 press ENTER If you get a “request timed out” , the message means nobody is using the IP address and this means you can use it on your network device. 2.3. APPLYING THE SETTINGS. Once we selected the new IP address 192.168.1.
TROUBLESHOOTING PROBLEM SOLUTION I can’t access the router configuration screen • • • Check your cable connections Check if you entered the correct router (gateway) IP address Check if your computer has a Firewall blocking the IP address I can access my router configuration screen but I don’t have internet connection I opened all the ports on the router and I can’t still connect to my remote Network device (DVR, video server) • If you are using a DSL modem, check if you connection is down.
It’s all on the web Product Information Specification Sheets User Manuals Software Upgrades Quick Start Guides Firmware Upgrades Lorex Technology Inc. www.lorexcctv.