Instruction manual

16
Actiontec
GT701-WG, GT704WR, R1020S, R1020S(U), R1520SU, R1524SU-1
Enter the IP address of your router in the
address bar of your browser.. By default
the IP address should be set to
192.168.0.1.
Click setup/configuration. You should
see the following menu.
Click ADVANCE at the side of the menu.
You will see the following menu
Click on Port Forward on the left hand side.
You should see the following menu.
Enter the following information :
IP Port Range. Enter a port range.
Example : For port 1080, start with port
1080, and end with port 1080.
- Protocol : Select the protocol type , TCP
or UDP
- IP address : Enter your Network device (*)
IP address.
Click on ADD to add the settings to the box
below.
If you have more ports to open repeat the
procedure.
To finish click on Save and RESTART
(*) See page 5 for more information