User manual
WireS
p
eed Dual Connect Modem
User Guide
11. PRODUCT SPECIFICATIONS
Dimensions
ADSL
• Width: 6.3 in. (16.0 cm)
• DSL Line Code: Discrete Multi-Tone (DMT)
• Depth: 5.07 in. (12.8 cm)
• DSL Rates: 32 kbps to 8 Mbps downstream
and 32 kbps to 800 Kbps upstream
• Height: 1.6 in. (4.0 cm)
• Power spectral density: -40 dBm/Hz
Weight
• DSL Impedance: 100 Ohms
• Approx. 2.0 lbs. (.90 kg)
• DSL Performance: Performance: per
G.992.1, ANSI T1.413.
Environmental
• Ambient Operating Temperature: +32 to
+104°F (0 to +40°C)
Protocol Features
• Bridge Encapsulation per RFC1483
• Relative Humidity: 5 to 95%, non-
condensing
• Logical Link Control/ Subnetwork Access
Protocol (LLC/SNAP)
• Software Upgradeable
Power Supply
• PPPoE Support
• 120 VAC to 12 VAC wall-mount power
supply
• ATM SAR: Internal to Modem
System Requirements for USB
Power Consumption
• Pentium Class PC or above
• Less than 8 watts typical, from 120 VAC
• Microsoft® Windows® 98, 2000,
ME, or XP installed
Connectors
• Operating system CD
• Power connector
• Internet Explorer 4.x or Netscape
Navigator 4.x or higher
• DSL/LINE: 6-pin modular jack
• PC: USB Series B connector
• 32 MB RAM
• Ethernet: 8-pin RJ-45 connector
• 10 MB of free hard drive space
• USB Version 1.0 or 1.1 compliant
bus
EMC Compliance
• FCC, Part 15 Class B
System Requirements for 10/100 Base-T/Ethernet
Safety
• Pentium® Class PC or above
• UL 1950, 3rd Edition
• Microsoft® Windows® 95, 98, 2000,
ME, NT 4.0, or XP installed
• cUL, CAN/CSA-22.2 950-93
• Operating system CD
Regulatory Approval
• 32 MB RAM
• UL
• Ethernet 10/100 Base-T interface
• CSA
• 10 MB of free hard drive space
• FCC, Part 68
• Industry Canada CS03
• TCP/IP Protocol installed
030-300196 Rev. A 26