User's Manual Part 2

TriLink Gateway – Draft 5
030-300445 Rev. A
6/22/05
030-300445 Rev. A 80 June 2005
User Guide
TriLink Gateway (Models 427V10, 427V11)
17.5.6 Port Mapping
The following screen will be displayed if you select LAN > Port Mapping from the Configuration menu. This
screen enables you to assign the physical ports to software groups. Enter the appropriate values, and then click save
to save your settings.
Interface The physical ports available for mapping
Group Factory Default: Private LAN
The software defined virtual LAN group to which the port should be assigned:
Possible Responses:
Private LAN
Public LAN
Bridge Group One
Bridge Group Two
Bridge Group Three
Bridge Group Four