User's Manual Part 2

TriLink Gateway – Draft 5
030-300445 Rev. A
6/22/05
030-300445 Rev. A 63 June 2005
User Guide
TriLink Gateway (Models 427V10, 427V11)
Firewall Logging
Log all permitted inbound traffic Factory Default = Disabled
If Enabled (box is checked), this function will be activated.
Log all permitted outbound traffic Factory Default = Disabled
If Enabled (box is checked), this function will be activated.
Log all blocked inbound traffic Factory Default = Disabled
If Enabled (box is checked), this function will be activated.
Log all blocked outbound traffic Factory Default = Disabled
If Enabled (box is unchecked), this function will be activated.
Log traffic specified in rules Factory Default = Disabled
If Enabled (box is checked), this function will be activated.
Log administrative access Factory Default = Disabled
If Enabled (box is checked), this function will be activated.
Remote Logging
Enable Factory Default = Disable
If Enabled (box is checked), the Router will send firewall logs to a syslog
server.
Remote IP Address The IP address of the syslog server machine to which the diagnostics logs
to be sent.
17.2 Port Forwarding Configuration
The following screen will be displayed if you select Port Forwarding from the Configuration menu. Port
Forwarding enables you to set up the Router’s port forwarding attributes for the services you add to your profile.