User's Manual Part 2

TriLink Gateway – Draft 5
030-300445 Rev. A
6/22/05
030-300445 Rev. A 103 June 2005
User Guide
TriLink Gateway (Models 427V10, 427V11)
17.8.4 Advanced Wireless Settings
The following settings will be displayed if you select Wireless > Advanced from the Configuration menu. Enter the
appropriate values, and then click save to save the settings.
Wireless Advanced Configuration
Beacon Period The time interval between beacon frame transmissions. Beacons contain rate and
capability information. Beacons received by stations can be used to identify the access
points in the area.
RTS Threshold RTS/CTS handshaking will be performed for any data or management MPDU
containing a number of bytes greater than the threshold. If this value is larger than the
MSDU size (typically set by the fragmentation threshold), no handshaking will be
performed. A value of zero will enable handshaking for all MPDUs.
Fragmented Threshold Any MSDU or MPDU larger than this value will be fragmented into an MPDU of the
specified size.
DTIM Interval The number of Beacon intervals between DTIM transmissions. Multicast and broadcast
frames are delivered after every DTIM
Supported Rates
802.11b Rates (Mbps)
802.11g Rates (Mbps)
These are the allowable communication rates that the Router will attempt to use. The
rates are also broadcast within the connection protocol as the rates supported by the
Router.
If you clicked save, the following pop-up screen will be displayed. Click OK to continue.