User's Manual

UltraLine II – Draft 1
030-300459 Rev. A
7/12/05
030-300459 Rev. A 11 July 2005
User Guide
UltraLine II (Model 800015)
Off
Wireless is disabled or not functioning.
NOTE: Safe Boot is reflected when the Power and Internet LED’s are both Red and all other LED’s are off.
5.2 Cable Connectors and Switch Locations
• Reset switch
• 4 Ethernet connectors (RJ-45)
• WAN connector (RJ-45) yellow
• Power connector (barrel)
• On/Off power switch
• Coax connector
• Wireless IEEE 802.11b/g SMA connector and antenna
Figure 1. Rear View of UltraLine II
5.3 Connector Descriptions
The following chart displays the connector types for the UltraLine II.
SYMBOL NAME TYPE FUNCTION
ETHERNET
(E1, E2, E3, E4)
RJ-45 10/100 Base-T Ethernet Connection to PC or Hub.
WAN RJ-45
WAN can function as a 10/100 Base-T Ethernet
connection to a WAN-side networking device. (e.g.,
xDSL, etc.), a DMZ LAN Port, or a fifth Ethernet
LAN Port, depending on the configuration.
12VDC
POWER Barrel connector Connection to DC (12V) Power Connector.
ETHERNET
(
E1
,
E2
,
E3
,
E4
)
12 VDC
POWE
R
RESET
COA
X
WIRELESS
WAN