User's Manual

UltraLine II – Draft 1
030-300459 Rev. A
7/12/05
030-300459 Rev. A 23 July 2005
User Guide
UltraLine II (Model 800015)
Duration.
LCP Echo Retry Duration Factory Default = 5
The interval between LCP. Echo after no response.
This value must be between 5 and 300 seconds inclusive.
At the Edit Connection screen, type your Connection Name, Account ID and Account Password (the Account
Password will be masked for security). The Connection Name is the name that you will use for this connection
profile. The Account ID and Account Password are provided by your Internet service provider. At the field labeled
Connection, select the connection type (i.e., Manual, On Demand, Always On) that you want to use with this
Connection Name. The factory default Connection Name is “MainPPP,” and the factory default connection setting is
“Always On.” If you change any settings in this screen, you must click Save to save the settings. Click Back if you
do not want to add or edit a connection profile.
NOTE: If you click Back before you click Save, the previously saved settings will remain active, and any recent
changes that you have made to this screen will not take effect. You must click Save to save the settings.