User's Manual

UltraLine II – Draft 1
030-300459 Rev. A
7/12/05
030-300459 Rev. A 58 July 2005
User Guide
UltraLine II (Model 800015)
Note: Tunneling is available in PPPoE mode only.
Obtain IP address automatically
(enable DHCP client)
Factory Default = Enabled
Select this option if you want the Modem to obtain its IP address
from the ISP’s DHCP server.
Use the following static addresses
(disable DHCP client)
Factory Default = Disabled
Select this option if you want to manually enter static IP addresses in
your Modem. The following addresses are provided by your Internet
service:
IP Address Enter the Modem’s IP network address, provided by your ISP.
Subnet Enter the Modem’s subnet mask settings, provided by your ISP.
Gateway Enter the Modem’s IP gateway address, provided by your ISP.
DNS Primary Enter the IP address of primary Domain Name Service (DNS) server
your Modem is using, provided by your ISP.
DNS Secondary Enter the IP address of secondary DNS server your Modem is using,
provided by your ISP.
15.9.2 QOS