User's Manual

UltraLine II – Draft 1
030-300459 Rev. A
7/12/05
030-300459 Rev. A 66 July 2005
User Guide
UltraLine II (Model 800015)
To add stations to the MAC Address table, click the Add button.
If you clicked Add, the following screen will be displayed. Enter the appropriate values in the fields provided, and
then click Save to save the settings.
MAC Address Settings
Traffic Factory Default = Allowed
If Blocked is selected, the station will be blocked (it cannot access the Modem).
MAC Address Factory Default = 00:00:00:00:00:00
The MAC address of the wireless station you want to add.
Station Name The name of the wireless station you want to add.
If you clicked Save, the following pop-up screen will be displayed. Click OK to continue.
NOTE: Wireless access will be interrupted and the wireless stations may require reconfiguration.