User's Manual Part 2

030-300419 Rev. A
Draft 8– 11/30/04
030-300419 Rev. A 55 November 2004
User Guide
Verizon One Telephone Subsystem
17. VERIZON ONE BASE UNIT CONTROLS
17.1 Base Unit Speakerphone Control Buttons
The following control buttons are provided on the Verizon One Base Unit for control of the Base Unit
Speakerphone.
NOTE: “Off-hook” refers to the condition when either the Base Unit or Handset is active in requesting a
dial tone or is engaged in a call. “On-hook” refers to the condition when either the Base Unit or a Handset
is not active in requesting a dial tone or placing a call.
Button Function
Menu Pressing this button quickly takes you to the iobi Menu.
Address Book Pressing this button quickly takes you to the iobi address book.
Speakerphone ON/OFF Button
Pressing the Speakerphone button will take the telephone off-hook,
enabling the speaker with an audible dial tone. The button will illuminate
and remain lit until it is pressed again to turn off the speakerphone.
Speed Dial
Pressing this button launches the Speed Dial application on the device,
and enables you to see all speed dial numbers.
Flash
Pressing this button simulates a momentary press and release of the
phone’s hook switch. When pressed initially, this button places the
phone in off-hook status. When pressed during an active call, this button
puts the active call on hold and accepts the incoming call as with call
waiting or 3-way calling.
Redial
Pressing this button enables you to redial the last number that was entered
in the phone. (Note: It will not redial numbers such as passcodes or
account numbers that may have been entered after the outgoing call was
established.)
Intercom
When the Intercom button is pressed on the Base Unit, it serves as a
paging device to locate the cordless Handset and/or to establish an
intercom call between the Handset and Base Unit. When the Intercom
button is pressed, the Handset will receive the signal from the Base Unit,
and will ring until the ‘talk” button on the Handset is pressed (set to off-
hook status) or until the Intercom button is pressed again.
Volume Up
Volume Down
Pressing and holding either of these buttons will continually raise/lower
the volume of the audio that emanates through the speaker until the
button is released or a maximum/minimum level is reached. The volume
level will be displayed while you are changing the volume. When the
phone is on-hook and ringing, the volume control buttons reverts to
controlling the phone’s ringer volume. The ringer volume may be turned
down to the point that it is turned off.
Mute
When pressed initially, the Mute button will mute the Verizon One’s
microphone so that the party on the other end of the telephone call may
not hear audio. This button will illuminate and remain lit while Mute is
activated. When the Mute button is pressed again (mute is deactivated)
the microphone will become active and the call will become audible to
the party on the other end of the telephone call.
Hold
When pressed once, this button will place the entire call on hold. Press