User's Manual Part 2

030-300419 Rev. A
Draft 8– 11/30/04
030-300419 Rev. A 34 November 2004
User Guide
Verizon One Telephone Subsystem
13.2 Adding a New Name
To add a new name, select [Select] when pointer is at (Add New Name). The following Name screen will be
displayed. This screen will prompt you for Name information. Select one of the following options:
NOTE: If the phonebook is full, you will not be able to enter a new name until entries are deleted from the
phonebook.
• Enter a name at the blinking underscore using the keypad characters (0-9, *, #). Note: If user tries to input more
than 11 characters, an error tone will be emitted and additional input will not be accepted. While in the Name
screen, you can select the [Clear] key to delete (backspace) characters.
• Press the <OFF> button to return to the Standby screen.
If the <Up/Down> button is pressed while you are at the Name screen, the Number screen will be displayed. Select
one of the following options:
• Enter a number at the blinking underscore using the keypad characters (0-9, *, #). Note: While in the “Number”
screen, you can select the [Clear] key to delete (backspace) numbers.
NOTE: Press the # symbol once to enter #. Press the # symbol twice to insert “P,” which is a 3-second pause
during dialing. If you try to input more than 24 digits, an error tone will emit and digit input is not accepted.)
The phone number will be formatted according to the following rules:
String of digits Screen Format
1 7 digit number ###-####
2 8 digits, leading digit 1 1 ###-####
3 10 digits (###)###-####
4 11 digits, leading digit 1 1(###)###-####
5 Other cases No formatting