User's Manual Part 1

030-300419 Rev. A
Draft 8– 11/30/04
030-300419 Rev. A 12 November 2004
User Guide
Verizon One Telephone Subsystem
8. INSTALLING THE VERIZON ONE HANDSET
To install the Handset, please follow the instructions provided in this section.
NOTE: The Verizon One kit includes a battery that provides power to the Handset when the Handset is not
cradled in the Base Unit. When the Handset is cradled in the Base Unit, the Base Unit will automatically begin
charging the handset battery. This battery can be found inside the battery compartment of the handset. Prior to
use, you must plug the battery into the handset as described in section 8.1 (Installing the Handset Battery).
8.1 Installing the Handset Battery
IMPORTANT: Before you install or handle the battery, please read section 3.2 for Battery Safety Instructions.
1. Remove the battery cover by pressing on the cover and then sliding the cover off the battery compartment.
2. Attach the battery cable connector to the connector socket inside the battery compartment, and then slide the
battery into the compartment. (Note: Prior to replacing the battery cover, be sure that the battery cables will not
obstruct the compartment when the cover is replaced.)