User's Manual Part 1

030-300419 Rev. A
Draft 8– 11/30/04
030-300419 Rev. A 23 November 2004
User Guide
Verizon One Telephone Subsystem
The following chart displays Main Manu and Submenu options available to the Handset.
Main Menu Option Submenu Option(s)
Incoming Calls
Save – Selecting this option enables you to save incoming calls.
Erase – This option enables you to erase any saved calls.
Erase All – This option enables you to erase all saved calls.
Ringer Setup
Ringer Volume – Selecting this option enables you to set the volume to the level
(Off, Low, Medium, High) on your Handset.
Ringer Tone – Selecting this menu enables you to select the melody that you want
to use for the Ringer. See section 12.5 for available options.
Keypad Tones – Selecting this menu enables you to turn On/Off keypad
confirmation tones.
Handset Name
Enter a name of your choice for the Handset.
Note: The default name for the Handset is “Verizon-One.”
Date and Time Enter the desired date and time settings on your Handset.
Registration View the Handset’s registration information.
12.2 Registration Menu
When the [Registration] menu is selected from the main menu screen, the following screen will be displayed. By
using this menu, you can register a Handset to the Base. Begin by pressing and holding the <Intercom> button on
the Base Unit for 3.5 seconds. Select [Exit] if you want to return to the Main Menu screen.
If you press and hold the <Intercom> button on the Base unit for 3.5 seconds, the Handset will display a “Wait
Registering” message while it is communicating to the Base.
After a successful registration, the Handset will emit a confirmation tone (long beep), and the screen will display the
“Handset x Registered” message for 2 seconds. Then, the Main menu screen will be displayed.