User's Manual Part 1

030-300419 Rev. A
Draft 8– 11/30/04
030-300419 Rev. A 24 November 2004
User Guide
Verizon One Telephone Subsystem
If the registration is unsuccessful, the Handset will emit an “error tone,” and the screen will display a “Registration
Failed” message for 2 seconds before returning to the initial Handset registration screen.
NOTE: The maximum number of handsets that can be registered to the Base is eight.
12.3 Date and Time Menu
When the [Date and Time] menu is selected from the main menu screen, the following screen will be displayed. The
pointer will be positioned at the time setting, and the first digit of time will blink to urge for input. After the first
digit has been entered, the second digit will blink. The blinking occurs in the following sequence: 1
st
-> 2
nd
(skip the
colon :) -> 3
rd
-> 4
th
-> in endless loop until the <Up/Down> button is pressed. An error tone will be given if
invalid digit is entered. After you have entered the desired time, select one of the following options:
• Select [AM/PM] to change the current “AM” setting to “PM” and vice versa.
• Press the <OFF> button to return to the Standby screen.
• Select [Save] to save the setting and to return to the Main Menu screen.
If <Up/Down> button is pressed at this time, the following Date screen will be displayed. The pointer will be
positioned at the time setting, and the first digit of time will blink to urge for input. After the first digit has been
entered, the second digit will blink. The blinking occurs in the following sequence: 1
st
-> 2
nd
(skip the colon :) ->
3
rd
-> 4
th
-> in endless loop until the <Up/Down> button is pressed. An error tone will be given if invalid digit is
entered. After you have entered the desired date, select one of the following options: