User's Manual Part 1

030-300419 Rev. A
Draft 8– 11/30/04
030-300419 Rev. A 29 November 2004
User Guide
Verizon One Telephone Subsystem
Name Screen
The caller’s name from the entry you selected at the Incoming Calls log will be displayed in the “Name” field.
Select from the following options, and then select [Save] to save the entry to the phonebook.
• Enter additional text to the caller’s name by pressing the # key, which will display at the blinking underscore at
the last character. Use the Handset keypad to input your text. You may also enter numbers ranging from 0 to 9.
NOTE: If you attempt to enter more than 11 characters into this field, the phone will emit an error tone and
additional characters will not accepted.
• Press the <Up/Down> button to go to the “Number” screen.
• Press the <OFF> button to return to the Standby screen.
• Select [Clear] to delete (backspace) characters.
• Select [Save] to save the entry to the Phonebook. Note: The phonebook will insert the new entry in alphabetical
order and renumber the list.
After you select [Save] in the “Name” screen, the “Name Saved” screen will be displayed for 2 seconds. The LCD
will then return to the Incoming Calls log.
If you select [Save] in the “Name” screen (and the screen does not contain a name), the entry is then entered into the
phonebook a “space (empty name)” record and inserted at the beginning of the list regardless of the number field.
The screen then returns to same item in the Incoming Calls log.