User's Manual Part 1

030-300419 Rev. A
Draft 8– 11/30/04
030-300419 Rev. A 30 November 2004
User Guide
Verizon One Telephone Subsystem
Number Screen
If you press the <Up/Down> button in the “Name” screen, the following “Number” screen will be displayed. The
caller’s phone number from the entry you selected at the Incoming Calls log will be displayed in the “Number”
field. Select from the following options, and then select [Save] to save the entry to the phonebook.
• Enter additional digits (0-9, *, #) at the blinking underscore by using the Handset keypad.
NOTE: Press the # symbol once to give a # or press the # symbol twice to insert “P,” which is a 3-second
pause during dialing. If you attempt to enter more than 24 digits into this field, the phone will emit an error
tone and additional digits will not be accepted.
• Select [Clear] to delete (backspace) characters.
• Press the <OFF> button to return to the Standby screen without saving any changes.
• Press the <Up/Down> button to go back to the “Name” screen.
• Select [Save] to save the entry to the Phonebook. Note: The phonebook will display the new entry in
alphabetical order and renumber the list.
If you select [Save] in the “Number” screen (and if the screen contains a number), the “Name Saved” screen will be
displayed for 2 seconds. The phonebook will display the new entry in alphabetical order and renumber the list.
If you select [Save] at the “Number” screen (and if the screen does not contain a number), the following “No
number entered” screen will be displayed. The phone will emit an error tone and then return to the “Number” screen
to enable you to enter a number. Enter a number into the “Number” screen, and then press save to save the entry to
the phonebook.