User's Manual Part 2

030-300419 Rev. A
Draft 8– 11/30/04
030-300419 Rev. A 41 November 2004
User Guide
Verizon One Telephone Subsystem
Press the <Up/Down> button to position the pointer at the desired option. If [Page] is selected while the pointer is at
“ALL,” all registered Handsets will be paged at the same time. The first Handset that replies can intercom to the
page originator.
NOTE: You must scroll down further using the <UP/Down> button to select the “ALL” option.
If [Page] is selected while the pointer is at a name, for example, “Lucy,” the “VerizonOne” Handset will page
Handset “Lucy,” and the following screen will be displayed on the “VerizonOne” Handset.
Alternatively, you can press the number on the keypad that corresponds to the Handset to be paged (for example,
press the <Intercom> button, and then press the number “2” to page “Lucy”). Select [Exit] on the screen, or press
the <OFF> or <Intercom> button if you want to stop paging and to return to Standby mode.
If you page Handset “Lucy,” the “Verizon-One” Handset will display the following screen.
If [Answer] is selected in the screen, or if the <Talk> or <Intercom> button is pressed on Handset “Lucy,” an
Intercom connection is established, and the “Verizon-One” Handset will display the following screen.
In this screen, the earpiece speaker volume level is set at Vol-2. Select [Exit], or press the <Off> or <Intercom>
button on either Handset to terminate the Intercom page.