User's Manual Part 2

030-300419 Rev. A
Draft 8– 11/30/04
030-300419 Rev. A 51 November 2004
User Guide
Verizon One Telephone Subsystem
15.2 Redial Screen
Press the <Redial> button while at the Standby screen to go to the redial list. The screen will display the 5 last
numbers that were dialed. Press the <Up/Down> button to review the list. Initially, pointer will be positioned at the
most recent number. Each redial number shall consist of maximum of 32 digits. If the last outgoing number matches
the number of an entry in the Phonebook, this name will be displayed instead of the number. Select one of the
following options:
• Press <Redial> again or [Dial] or <TALK> will go off hook and dial the pointed number.
• Select [Save] to initiate a Name entry. If the number of digits inside the off-hook redial buffer is less than or
equal to 24 digits count, then this redial buffer can be totally stored into memory. The number input will be in
place on the number row. The phone will prompt you enter a name. If the number of digits is more than 24
digits, “Unable to Save” will be displayed. After the number is successfully stored, the display will return to
redial screen.
• Press <OFF> to put the phone in the on-hook state and to go to the Standby screen.
15.3 Incoming Call Screen
During the first ring of an incoming call, the LCD will display the “Incoming Call,” as shown in the following
screen. If there is an incoming call while the Handset is in a menu, the menu will quit and show the incoming call
screen.
If a name is present in the Caller ID log, then the Handset will display that name and number as delivered.
If no name is present in the Caller ID log, the Handset will then match the number with the Phonebook. If there is
matching record found, the name field of the LCD will display the name field of the Name entry.
If there is an incoming call and before user picks up the call the caller hangs up, the Caller ID display will remain on
the LCD until 60 sec time out. Before time out, user may cancel the CID display by pressing <OFF/clear>,
<TALK/flash> and Up/Down arrow. These keys function immediately after pressed. For example, pressing
<TALK/flash> once will clear Caller ID display, and then the phone will enter an off-hook state.