User's Manual

030-300629 Rev. A 106 February 2011
User Guide VersaLink Wireless Gatewa
y
(
Model 7550
)
NOTE: If you clicked Cancel in the Create Port Forwarding Service screen, the service you created will be
displayed; however, it will not be activated in your Router. You must click Apply to allow the settings to take effect.
Port Forwarding Service
Protocol
TCP – Transmission Control Protocol
UDP – User Datagram Protocol
Global Port Start The WAN-side TCP/UDP start port.
Global Port End The WAN-side TCP/UDP end port.
Base Host Port The port on the WAN that will host the port forwarding service selected. Base Host Port is
the first port that will be used for a specific service when configured for a range of ports.
Direction/
Port Directon
The port direction for the port forwarding rule.
If you clicked Apply, the following Service Details screen will be displayed. Click Done.