User's Manual

030-300629 Rev. A 109 February 2011
User Guide VersaLink Wireless Gatewa
y
(
Model 7550
)
If you clicked the Port Triggering option in the preceding screen, the following Create Port Triggering Rule
screen will be displayed.
2. Type the name of the custom service that you are creating in the field provided. This will be the name of the
port forwarding service for which you are configuring specific Port Triggering rules.
3. Enter the desired Global Port Start, Global Port End, Local Port Start, and Local Port End values in the fields
provided, as shown in the example below.
4. Select the desired Incoming and Outgoing protocol for the rule.
5. Click Apply to allow the changes to take effect.
NOTE: If you clicked Cancel in the Create Port Triggering Service screen, the values you entered will be
displayed; however, they will not be active in your Router. You must click Apply to allow the settings to take effect.