User's Manual

030-300629 Rev. A 113 February 2011
User Guide VersaLink Wireless Gatewa
y
(
Model 7550
)
If you clicked Enable in the preceding screen, the following pop-up screen will appear. The Router must be reset to
allow the new configuration to take effect. Click OK to continue.
If you clicked OK, the following screen will appear. After a brief delay, the home page will b e displayed. Confirm
that you have a DSL link and that your PPP Status displays UP. (If necessary, click the Connect button to establish
a PPP session).
To confirm that DMZ Host has been enabled, select Firewall Settings in the top navigational menu, and then click
DMZ Host in the submenu options at the left of the screen. Next, click Yes in the warning screen. The following
DMZ Host screen will be displayed. This screen shows that DMZ Host is currently enabled for the selected device.
IMPORTANT: After you disable DMZ Host, you may need to release and renew your IP address to communicate
with the Modem.