User's Manual

030-300629 Rev. A 119 February 2011
User Guide VersaLink Wireless Gatewa
y
(
Model 7550
)
15.6.1 Enabling Static NAT
If you clicked Yes in the warning screen, the following Static NAT screen will appear. The Static NAT screen
allows you to configure your Router to work with the special NAT services. When the Router is configured for
Static NAT, any unsolicited packets arriving at the WAN will be forwarded to the selected device. This feature can
be used when you want to host a server for a specific application.
IMPORTANT:
Static NAT and DMZ Host a re mutually exclusive features. Before you enable static NAT, confirm that DMZ Host
is disabled. If needed, refer to section 15.4.2 for details on disabling DMZ Host.
To enable Static NAT, select a device from the Static NAT Device drop-down menu, or enter the IP address of the
device to which you want to assign Static NAT. Next, click Enable.
The following screen shows that Static NAT has been enabled for the device you selected.