User's Manual

030-300629 Rev. A 132 February 2011
User Guide VersaLink Wireless Gatewa
y
(
Model 7550
)
16.8 Detect WAN Configuration
In the Advanced screen, click Detect WAN Configuration. This screen displays the details of your WAN
connection.
NOTE: If you have not established and DSL connection with your ISP’s equipment and have not established an
Internet connection with your ISP, the Router will report Detection Disabled. Confirm that you have Internet
connection with your ISP. If problems persist, contact your ISP.
To check your WAN connection, click Detect Configuration. The Router will be reset.
If no connection is detected, the following screen will appear. Click Enable Continuous Retries. The Router will
automatically continue to check the WAN connection. After a WAN connection is detected, the Router will report
the results.