User's Manual

Bi-directional Amplifiers

510 and 610 Series

WESTELL.COM

1.877.844.4274 Page 16 of 29

Inside omnidirectional antenna

ClearLink-O/698-2.7K/N

Power dividers

ClearLink – SPD2/698-2.7K-LP/N

ClearLink – SPD3/698-2.7K-LP/N

ClearLink – SPD4/698-2.7K-LP/N

Grounding kit - model number CSI-GKIT

Lightning arrestor - model number CSI-CAP

Directional couplers and cross band couplers are also available.

4 LCD Command Interface

4.1 Command Interface Overview

The menu system can be navigated with ﬁve buttons: Up, Down, Edit, Save and Menu. Feedback is given to the

operator through the LCD panel.

The LCD command interface offers two distinct series of menus: the View menu series, which allow a user to view,

but not alter, the data maintained by the unit. The Edit menu series permits the alteration of this information. The

Edit menu series may be kept secure from general use by a password. If password control is enabled, an added level

of security is provided; however, this unit is shipped with this feature disabled.

In both menu systems the Menu button is used to maneuver between menus in a sequential fashion. Edit is generally

used to enter the Edit menu series, and Save is generally used to exit it. Pressing Save in all menus except the one

that allows you to alter the Edit BDA Name menu (explained below) will force any changes made while in the Edit

menu series to be saved in non-volatile memory. The BDA will then exit the Edit menu series; if the user needs to

edit more information, they will need to press Edit and enter a password again. The Up and Down buttons are

usually used to scroll through options within a given menu, if several options exist.

Each menu series and the way each menu represents and interprets data is explored later in detail.

4.2 The View Menu Series

Figure 4-1 depicts the series of menus that will allow the user to view, but not alter, the information stored in the

BDA. Pressing the Edit button will cause the BDA to ask for a password if password control is enabled. Password

control is enabled by pressing Edit and Menu simultaneously. The password is a ﬁve-button sequence that secures

the ability to change the information within the BDA. Keys in this password can consist of any button except Menu.

This password defaults to the following sequence until changed by the user:

Down, Down, Up,

Up.