User's Manual

-12-
When the LTE700 software installation is complete the program may be launched
by clicking start >CSI>LTE700.exe
To confi gure the LTE700
software to communicate
with the repeater, click the
down arrow to the right
of “COM port” selection
box. A fl y out menu will
be displayed and allow the
user to select the COM port
confi gured for use on the
controlling computer.
When the “COM port” has
been selected the pro-
gram will interface with the
repeater and the TX and
RX indicators will illuminate
green. If red, check the COM
port settings on the computer
and that the correct COM port
has been selected in the fl y
out above.
Starting the Program