Manualshelf

User's Manual

ManualsBrandsWestell ManualsCell PhonesTHE CO-PILOT BEACON IS THE FIRST VIABLE LOCATION BASED SOLUTION FOR SIMULCAST CDMA DISTRIBUTED ANTENNA SYSTEMS (DASS). IT IS DESIGNED TO IMPROVE LOCATION ACCURACY OF CELL PHONES AND WIRELESS DEVICES OUTDOORS AND WITHIN BUILDINGS
21222324252627282930
-22-
Figure 1
Figure 2
Local access to the pilot beacon TMI, also known as the console interface, is made by connecting a serial cable (optional), as shown in
figure 1, from the serial connector of the laptop the serial port on the bottom end panel of the pilot beacon. This connector is labeled COM
1.
Warning: do not attach the serial cable to the port labeled GPS RECEIVER. In some cases, if the gender of the connector is not
the same as shown in figure 1, a null modem adapter (optional) as shown in figure 2 may also be required.
Text Menu Interface (Local Access):