Cellular Specialties, Inc.
Table of Contents 1. Product Description Background Functional Description Functional Block Diagram Outline Drawing 2. General Specifications 3.
1. Product Description Background The performance of a cell phone can be easily degraded when in enclosed structures where signals from a local cell site are not sufficient for reliable phone operation. The Model 110 Miniature In-Building Amplifier (MiniIBA) was developed by Cellular Specialties, Inc. (CSI) to enhance cellular performance within these enclosed structures. Specifically, the Mini-IBA is designed to cover small areas such as home offices, small workshops, etc.
FIGURE 1 Functional Block Diagram FIGURE 2 Outline Drawing 4 Mini-IBA Manual 05/31/01
2. General Specifications All specifications stated as typical unless otherwise noted. Cellular Specialties, Inc. reserves the right to change these specifications at any time without prior notice.
3. Inspection and Installation Inspection Inspect the equipment as soon as possible after purchase. If any part of the equipment has been damaged in transit, report the damage to the transportation company and also to the company where purchased. Contents The unit package contains the following: Model 110 Mini-IBA Power Transformer, 110 volt to 6 volt – model number ( User Manual ) Optional Accessories Accessories are available directly from Cellular Specialties, Inc. or any of CSI’s distributors.
The Mini-IBA and interior antenna should be centrally located, keeping coaxial cable runs to a minimum. A maximum length of 100 feet of low loss cable is recommended. The actual coax used should be RG-8 type with a flame retardant rating as a minimum. If the coax is run through an area where heating and/or cooling air is channeled, a plenum rated coax should be used. When mounting the amplifier, take care to avoid areas of high heat or extreme cold.