User Manual

030-300452 Rev. A
BellSouthVersaLinkGateway
3/6/06 – Draft 5
030-300452 Rev. A 123 March 2006
VersaLink Gateway (Model 327W)
User Guide
12.1 Configuration
If you click the Configuration button at the Wireless page, the following page will be displayed. Enter the desired
values in the fields provided, and then click save to allow the settings to take effect. To edit the MAC Filter Table,
click the edit button. To reset this page to the previously saved settings, click reset.
Wireless Configuration
Wireless Operation
Factory Default = Enabled.
Displays the current setting of the modem’s wireless operation.
Network Name (SSID)
This string, (32 characters or less) is the name associated with the modem. To connect
to the modem, the SSID on a station card must match the SSID on the modem. (Note: If
the SSID on a modem is hidden, at the station card you must manually type the SSID of
the modem to which you are trying to connect.)
Channel
Factory Default = 6
The modem transmits and receives data on this channel. Station cards no dot have to be
set to the same channel as the modem; the station cards scan all channels and look for
the modem with the correct SSID.