User's Manual Part 1
Table Of Contents
- 1. PRODUCT DESCRIPTION
- 2. REGULATORY INFORMATION
- 3. NETWORKING REQUIREMENTS
- 4. HARDWARE FEATURES
- 5. INSTALLING THE ROUTER
- 6. ACCESSING YOUR ROUTER
- 7. CONFIGURING YOUR BROADBAND CONNECTION
- 8. CONFIGURING YOUR DEVICE FOR DHCP
- 9. BASIC CONFIGURATION
- 10. MAIN (HOME PAGE)
- 11. WIRELESS
- 11.1 Wireless Status
- 11.2 Basic Security Settings
- 11.3 Advanced Security Settings
- 11.3.1 SSID Broadcast
- 11.3.2 Wireless MAC Authentication
- 11.3.3 802.11b/g Mode
- 11.3.4 Other Advanced Wireless Options
- 11.3.5 Configuring the Stations Security Type
- 11.4 Device List
- 12. MY NETWORK
03/24/09 - DRAFT
030-300554 Rev. C 12 March 2009
Verizon FiOS Router
(
Model 9100EM
)
User Guide
4.4 Connector Descriptions
The following chart describes the Router’s rear panel connector and switches.
N
AME TYPE FUNCTION
COAX
F-type coaxial
connector
Connects the Router to the in home coaxial cabling. Compatible with the
Multimedia over Coax Alliance (MoCA) standards.
USB USB Connector
Connects the Router to peripheral devices (e.g. storage) via USB. Note: This
port may not be enabled in all UltraLine Series3 units.
LAN
8-pin (RJ-45)
modular jack
Connects the the Router’s 10/100 Base-T Ethernet swtich to a local computer
or other Ethernet-enabled device.
WAN
8-pin (RJ-45)
modular jack
Connects the Router to a broadband modem or router, enabling access to the
Internet or Wide Area Network (WAN).
POWER Barrel connector
Connects to the Router’s DC 12V power supply. Only use the power supply
provided with the Router.
OFF/ON Off/On Switch Allows you to turn the Router on or off.
WIRELESS
ANTENNA
and
CONNECTOR
SMA connector
and antenna
Antenna for trasmitting and receiving wireless signals for Wi-Fi (802.11b/g)
connected devices.