User's Manual Part 1
Table Of Contents
- 1. PRODUCT DESCRIPTION
- 2. REGULATORY INFORMATION
- 3. NETWORKING REQUIREMENTS
- 4. HARDWARE FEATURES
- 5. INSTALLING THE ROUTER
- 6. ACCESSING YOUR ROUTER
- 7. CONFIGURING YOUR BROADBAND CONNECTION
- 8. CONFIGURING YOUR DEVICE FOR DHCP
- 9. BASIC CONFIGURATION
- 10. MAIN (HOME PAGE)
- 11. WIRELESS
- 11.1 Wireless Status
- 11.2 Basic Security Settings
- 11.3 Advanced Security Settings
- 11.3.1 SSID Broadcast
- 11.3.2 Wireless MAC Authentication
- 11.3.3 802.11b/g Mode
- 11.3.4 Other Advanced Wireless Options
- 11.3.5 Configuring the Stations Security Type
- 11.4 Device List
- 12. MY NETWORK
03/24/09 - DRAFT
030-300554 Rev. C 35 March 2009
Verizon FiOS Router
(
Model 9100EM
)
User Guide
In the Internet Protocol Version 4 (TCP/IPv4) Properties window, complete the following steps:
1. Click the radio button labeled Obtain an IP address automatically.
2. Click the radio button labeled Obtain DNS server address automatically.
3. Click the OK button to save the changes.
4. Click Close and then click Close again to close the screens.
This completes the procedure for configuring DHCP in the Vista operating system. You are now ready to proceed to
section proceed to section 6.1 of the User Guide for instructions on logging on to your Router.