User's Manual Part 1
Table Of Contents
- 1. PRODUCT DESCRIPTION
- 2. REGULATORY INFORMATION
- 3. NETWORKING REQUIREMENTS
- 4. HARDWARE FEATURES
- 5. INSTALLING THE ROUTER
- 6. ACCESSING YOUR ROUTER
- 7. CONFIGURING YOUR BROADBAND CONNECTION
- 8. CONFIGURING YOUR DEVICE FOR DHCP
- 9. BASIC CONFIGURATION
- 10. MAIN (HOME PAGE)
- 11. WIRELESS
- 11.1 Wireless Status
- 11.2 Basic Security Settings
- 11.3 Advanced Security Settings
- 11.3.1 SSID Broadcast
- 11.3.2 Wireless MAC Authentication
- 11.3.3 802.11b/g Mode
- 11.3.4 Other Advanced Wireless Options
- 11.3.5 Configuring the Stations Security Type
- 11.4 Device List
- 12. MY NETWORK
03/24/09 - DRAFT
030-300554 Rev. C 60 March 2009
Verizon FiOS Router
(
Model 9100EM
)
User Guide
11.3.5.1.2 Authentication Method—802.1x
If y
o
u select 802.1x as the authentication method for WPA, the following screen appears. Configuring 802.1x allows
devices that support 802.1x to connect to the Router.
To configure WPA authentication for 802.1x, do the following:
1. Select the desired option from the Encryptoin Algorithm drop-down list.
• TKIP: Select this option to enable the Temporal Key Integrity Protocol for data encryption.
• AES: Select this option to enable the Advanced Encryption Standard for data encryption.
• TKIP and AES: Select this option to enable the Router to accept either TKIP or AES encryption.
2. Enter the desired Group Key Update Interval, and confirm that the box contains a check mark. (By factory
default, Group Key Interval is enabled for 900 seconds.)
3. Configure the Radius Server:
a. Enter the Radius Server IP address in the fields provided.
b. Enter the desired Server Port value.
c. Enter the Shared Secret.
4. Click OK to save the wireless settings in the Router.