User's Manual Part 2

03/24/09 - DRAFT
030-300554 Rev. C 95 March 2009
Verizon FiOS Router
(
Model 9100EM
)
User Guide
12.2.4 WAN PPPoE
WAN Point-to-Point Protocol over Ethernet (PPPoE) is a protocol used to connect the Router to the Internet. PPPoE
enables Ethernet-networked computers to exchange information with computers on the Internet.
NOTE: The protocol used for your Internet connection is determined by Verizon. The Router is capable of
automatically detecting the protocol used for your Internet connection.
If you are configuring your Router’s protocol setting for WAN PPPoE, in the Network Connections screen, select
the WAN PPPoE link.
The following screen appears. View the details in this screen. If desired, you can change the connection name. To
change the name, type your desired name in the Name field. Then, click Apply to save the changes. Select an option
in the left submenu to access that configuration page:
• Select Configure Connection to access the WAN PPPoE Properties screen.
• Select Routing to configure the Routing properties for your WAN PPPoE. Refer to section 15.23 for details on
R
out
ing.
• Select PPP to configure the Router’s PPP settings.
The following sections describe these options.